Contact IC card reader is specially read and write contact IC card (is the chip leakage IC card), through the readers metal contact and IC card metal pin contact for communication, so that the communication stability, rate are very good. Then contact IC card reader in the use process also need to pay attention to what? Heres a look at it.
Contact IC card reader use precautions
Contact IC card reader use precautions.
A. Plug-in card holder
1, for plug-in card holder, pay attention to prevent inserting the card too hard, too hard will damage the card holder in place of the switch, and the card also has a certain harm. Once the switch is damaged, the reader will not be able to judge normally whether there is a card inserted.
2, pay attention to keep the card clean, if the card chip surface defacement, not only the card can not work properly, but also will cause pollution to the contact point of the card holder.
3, the card in place and then operate this point is very important, in the unstable situation read-write to the card for power operation, may cause damage to the card.
4, plug-in card holder in the card after the completion of the operation, the application should first send a command to let the reader to the card for under power operation, after the completion of under power will pull out the card. In the case of no power under the card out of the card may cause damage to the card.
Second, push the push type card holder
1、Push-push card holder adopts push in the card, and then push in the card will eject the card when taking out. This structure reduces the friction between the card and the electrocution, and has certain advantages for the protection of the card. But if not used correctly will also damage the card.
2, the most common error is to take out the card is not to push in again to let the card automatically ejected, and directly pull out the card, this situation will seriously damage the card, and also will seriously damage the card holder.
3, pay attention to keep the card clean, any structure of the card holder is eventually to be in close contact with the card chip contact, so if the card chip is unclean, it will cause pollution to the contacts of any kind of card holder.
At present, Card Cube provides contact IC card readers such as T6 contact IC card reader, D6 contact IC card reader and D3 contact IC card reader. In addition, the company also provides inductive IC card reader, magnetic stripe swipe card machine, visual card printer, ID card reader and various types of ID cards, IC cards, magnetic stripe cards, etc. If you want to order or consult, you can contact our online customer service, card cube welcome you!