Welcome To CardCube Group ! The Largest Manufacturer Of RFID Custom Products
Update time：2023-03-27 10:04:27 / Views：138
Contactless PVC card S70 chip card production. S70 chip card using Philips (NXP) original Mifare PVC S70 chip, in line with IEC/ISO 14443A interface protocol. It has advanced data encryption and two-way password verification system S and 50 chip compared to the storage capacity is greater, is the preferred RFID products for enterprise card, water meter prepaid, bus stored value card, highway toll, parking, community management, traffic cards, parks, highways, etc.
Non-contact PVC card of S70 chip card production
Mifare S70 chip card specific parameters.
Chip type: Philips Mifare 1 S70
Storage capacity: 32Kbit, 32 partitions, two codes per partition
Operating frequency: 13.56 MHz
Communication rate: 106KBoud
Read/write distance: 2.5~10cm
Read/write time: 1~2ms
Operating temperature: -20℃~+55℃
Erase life: >100,000 times
Data retention: >10 years
Dimension: ISO standard card 85.6 x 54 x 0.80mm
Package material: PVC, PET, PETG, ABS
Implementation standard: ISO 14443A
Previous：What are the production methods of luminous smart cards?
Next：What kinds of chips are commonly used in inductive PVC cards?
When a new student enters the university, the school will give the student a student card in the newspaper", many students will think that with this student card, they can enjoy many preferential poli
A card is a variety of functions on a card! To achieve a card multi-use intelligent management, a ca
1、PVC can be divided into soft PVC and hard PVC. hard PVCs surface hardness, tensile strength, rigid
Common card making materials are PVC, PET, ABS, PC and other materials, PVC can be divided into soft
Standard: ISO7816 defines the distance from the midpoint of the IC card chip to the edge of the card
The production cost of magnetic stripe card and barcode card is much lower than IC therefore, it is welcomed by the small and medium-sized enterprises with small customer flow and small customization
