① file with bleeding size is 88.5 * 57mm, the finished size is 85.5 * 54mm, the word and figure too close to the edge, so as not to cut Note: when passing the file, please pass with bleeding (88.5 * 57)

Standard card production 8 norms!

②the width of the magnetic stripe is 12.7mm, and the magnetic stripe is 6mm from the edge (88.5*57).

③Convex code: small convex code with No. 14, large convex code with No. 18, the maximum distance from the edge of the finished size is less than 6mm (up and down, left and right).

④Please indicate the actual size in the figure to avoid insufficient position, typing or figure.

⑤PSD file pixels should be more than 300 dots and the mode is CMYK.

⑥CDR file text should pay attention to the turn, convex code, signature bar, magnetic strip, stamping and other unprinted elements to be removed, the file should be changed to a right angle, rounded corners may miss the white edge, the second rounded corners to use the stroke, the first is likely to appear burr.

⑦ stamping file must be vector, that is, must be CDR or AI file, PSD file can not be stamping.

⑧ all black words must be a single black word, can not be four-color (single black printing, four black printing)

⑨ black background must be four-color black (value: C30 M30 Y30 K 100), otherwise printed gray

⑩Please indicate the requirements for the production of the card (quantity, convex code, signature strip, magnetic strip, etc.) when passing the document