Update time:2023-03-27 11:02:40 / Views:145
The process of making smart card and other PVC cards are actually no different. The only difference is that the smart card is with a chip, one is external (the chip can be seen on the surface of the card); the other is the chip built-in (the chip is not visible on the surface, the induction card is a coil, which is in the middle of the card).
What is the process of making smart cards?
Smart card process: Silkscreen silver base: Before printing the color, a layer of glitter is silkscreened on the surface of the card, and then the color is printed. If your card in the printing of gray, it will have the effect of flash silver, in the printing of yellow will have the effect of flash gold.
Hot stamping: hot stamping is a layer of gold paint up, after printing the card, with hot stamping version overprinted on, hot stamping will have a 3mm error (will be shifted).
Thickening: thickening is to add a few millimeters of thickness on the basis of the normal thickness, to do thickening process must be special edition printing.
There are many other processes, please click into the process introduction.
Previous:How the leisure club PVC card is designed and produced