RFID Tags / RFID Inlay
The RFID card inlay is two or three PVC/PET layers laminated with embedded chip and antenna, also called chip material or pre lam (pre-laminating), it is a semi-finished product and core component of RFID card. Produced in the early stage of card production, RFID card inlay allows card factories to economically produce printed and personalized card easily and shorten production time
Different sizes, materials, chips are available, and you can personalize it.
24-hour one-on-one service, Fast delivery, and Good packaging.
1, ultrasonic embedding copper antenna, reasonable COB design, guarantee high consistency, reliable performance.
2, reliable spot welding guarantee very solid welding point, the pull force exceeds 80g, minimize the card mal-function rate
3, brand new high quality PVC/PET material ensures the sturdiness, and easy to process,
4, chip shelter processing and high temperature steel sheet laminating technique guarantee the flatness of the whole inlay, no bumps on the inlay.
5, Trimmed reference edges and optional printed cross marks to make the further process easier.
6, semi-finished core material of RFID cards, it helps lower down the production cost of printed and personalized RFID cards.
7, it has complete most of the early stage work of a RFID cards, it shorten the production cycle dramatically
Packing: PVC, PET, PET-G, PC
Antenna: copper coil, aluminum
HF: 0.5mm/0.45mm/0.42(popular worldwide)/ 0.35mm/0.32mm
Layout & size
305*460mm(popular inside China)
295*480mm(popular inside China)
extra-large size 56(7*8) layout is available, another layout can be customized.
125KHz, 13.56MHz, 915MHz
HF: Mifare S50, S70 / Ultralight/ Ntag213/Desfire(4k, 8k) / iCode slix / legic, FM11RF08 / C50 / ISSI4439
LF: EM4100 / EM4305/ EM4450 / ATA5577 / TK4100
UHF: Alien series and Impinj series
HF: Aluminum etching, pre-winding copper coil, ultrasonic wire implanting / ultrasonic welding
LF: Pre-winding copper coil
UHF: Aluminum etching
Direct pressure technique
Double-sided sheltering (ensures the flatness of the chip position, no bumps)
|-25°C ~ +65°C|
Standard contactless card inlay is mainly used to produce standard contactless cards, including RFID PVC Card, RFID PET Card, low frequency card, high frequency card, UHF card etc.
The RFID card inlay is two or three PVC/PET layers laminated with embedded chip and antenna, also called chip material or pre lam (pre-laminating), it is a semi-finished product and core component of
The irregular contactless card inlay is core component of irregular RFID card, such as: mini card, keychain card, epoxy card, etc. We choose reliable card components and connect them reliable. We ca
Inlay sheet for combi card means the prelam (pre-laminating) specially designed for smart card contact and smart card contactless. It supports both contact and contactless communication, and controlle